product data sheet co-6000 series surface mount oven controlled crystal oscillators features ?5 mhz, 10mhz, 13mhz standard. other frequencies available from 4.8 mhz to 40 mhz. ?stability as high as 5 x 10 -9 over 0? to +50? ?aging: 5 x 10 -9 / day to 5 x 10 -10 /day ?package: 1.0 x 0.9 x 0.42 (25.4 x 22.0 x 10.5 mm) ?low profile, surface mount design ?supply voltage: +5 volts or +3.3 volts applications ?telecommunication systems ?wireless communication equipment ?data communications ?instrumentation description vectron intern ational has introduced a series of low profile, surface mount, oven controlled crystal oscillators (ocxos) available in frequencies from 4.8 mhz to 40 mhz. the model co-6000 series provides exceptionally low aging rates and high temperature stabilities and is pack- aged as a surface mount device (smd), measuring 1.0 x 0.9 x 0.42 (25.4 mm x 22.0 mm x 10.5 mm). the oscillators pro vide an aging rate of 1 x 10 -9 /day with temperature stabilities as high as ? x 10 -9 over 0? to 50?. they operate from a supply voltage of +5vdc or +3.3 vdc at a stabilized power of 1.0 watts. the product finds application in telecommunications, data communications, frequency synthesizers, timing, navigation, telemetry and instrumentation systems.
co-6000 series surface mount oven controlled crystal oscillators performance characteristics vectron international ?166 glover avenue, norwalk, ct 06856 ?tel: 1-88-vectron-1 ?fax: 1-888-fax-vectron 2 co-6004/6006/6007 series co-6007s/6008s series (at cut crystal) (sc cut crystal) frequency: 4.8 mhz to 40 mhz with 5, 10, 13, 16.384, 19.44, 20, 20.48, 26 and 38.88 mhz standard temperature stability: b28: ? x 10 -8 over 0? to +50? sb59: ? x 10 -9 over 0? to +50? c58: ? x 10 -8 over 0? to +70? sc18: ? x 10 -8 over 0? to +70? d17: ? x 10 -7 over -20? to +70? sd28: ? x 10 -8 over -20? to +70? aging: co-6004: 1 x 10 -8 /day (2 x 10 -6 /yr) co-6007s: 1 x 10 -9 /day (1 x 10 -7 /yr) co-6006: 3 x 10 -9 /day (3 x 10 -7 /yr) co-6008s: 5 x 10 -10 /day (5 x 10 -8 /yr) co-6007: 1 x 10 -9 /day (1 x 10 -7 /yr) optional at some frequencies warm-up: to within 1 x 10 -7 of final frequency to within 1 x 10 -8 of final (after 24 hours off) in 5 minutes @ 25? frequency in 5 minutes @ 25? frequency vs. supply (?%): 1 x 10 -9 /percent 1 x 10 -9 /percent short term (allan variance): 1 x 10 -10 /second 5 x 10 -11 /second output level: hcmos/ttl standard, >0.5 vrms/50 ohm (+7 dbm) optional (lvcmos output with +3.3vdc power supply) harmonics (sinewave): -25 dbc power supply: +5 vdc ?%; 2.5w peak @ -20?; 1.0w stabilized at 25? (+3.3 vdc ?%, optional) frequency adjustment: ? x 10 -6 typical for 0 to 4v control ? x 10 -6 typical for 0 to 4v control phase noise: -100 dbc/hz @ 10 hz offset -120 dbc/hz @ 10 hz offset (typical) -140 dbc/hz @ 50 khz offset -145 dbc/hz @ 50 khz offset size mm (in.) : 25.4 x 22 x 10.5mm (1.0 x 0.9 x 0.42 max.) base: fr4 material with edge contacts reflow: 240 (+5, -0)? for 10 to 40 seconds characteristic parameter
co-6000 series surface mount oven controlled crystal oscillators vectron international ?166 glover avenue, norwalk, ct 06856 ?tel: 1-88-vectron-1 ?fax: 1-888-fax-vectron 3 outline drawing test circuit 0.1 (2.5) 0.1 (2.5) 1.0 .01 (25.4 0.2) 0.03 r(o.75) 4 5 soldering pods 1 1 2 3 5 4 2 3 .70 .01 (17.8 0.2) 0.87 .01 (22 0.2) 0.41 max (10.5) foot print for pcb design 0.93 (23.5) 0.16 (4) 0.14 (3.5) .70 (17.8) v control gnd oscillator 470 ohm oscilloscope, counter or spectrum analyzer r l = 50 ohm 1 5 v v a 34 +v b pin configuration 1. control voltage v c 2. reference voltage output v ref 3. supply voltage v b 4. rf-output 5. ground, case in (mm) recommended soldering profile
co-6000 series surface mount oven controlled crystal oscillators usa: vectron international ?166 glover avenue, norwalk, ct 06856 . . . . tel: 1-88-vectron-1 ?fax: 1-888-fax-vectron europe: in denmark, finland, ireland, israel, norway, spain, uk . . . . . . . tel: 44 (0) 1703 766 288 ?fax: 44 (0) 1703 766 822 in austria, belgium, france, germany, italy, luxembourg netherlands, sweden, switzerland, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tel: 49 (0) 72 63 6480 ?fax: 49 (0) 72 63 6196 asia: in china, taiwan, japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tel: 603-598-0070 ?fax: 603-598-0075 in korea, singapore, australia, india . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tel: 203-853-4433 ?fax: 203-849-1423 vectron international reserves the right to make changes to the product(s) and/or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such produ ct(s) or information. printed in the usa 12/99 www.vectron.com 4 tape and reel how to order co-600 aging* 4=5x10 -9 /day (5x10 -7 /yr) 6=3x10 -9 /day (3x10 -7 /yr) 7=1x10 -9 /day (1x10 -7 /yr) 8=5x10 -10 /day (5x10 -8 /yr) optional for some frequencies temperature stability (see page 2) (eg c58 = 5x10 -8 over 0 c to 70 c) frequency output 1: hcmos/ttl 2: sinewave 3: lvcmos with +3.3vdc supply for additional information please contact: note: dimensions in mm
|
